Продам YAWA ME 1050 AII/VA Б/У в Bremerhaven

Year 2008

Max. Sheet size: 1050 x 750 mm
Min. sheet size: 450 x 370mm
Max. Punching area: 1040 x 730 mm
Max. Frame size: 1120 x 760mm
Min. gripper edge: 8mm
Height of punching lines: 23.8 mm
Material thickness: Karton 0.2 - 1.5 mm

Max. Punching speed: 7.500 sheets / hour
Max. Stripping speed: 5500 sheets / hour
Max. Pressure: 300 tons
Feeder height: 1400 mm
Feeder height: 1150 mm
Motor power: 11 kw
Power consumption: 22 kw
Weight: 18.000 kg
Connected load: 380 v, 3 phases, 50hz
The machine is CE certified and equipped with all the necessary safety
equipment.

Feeder:

• YOCO-MABEG shingle feeder
• Four lifting and five transport suckers, all angles adjustable for proper
  processing of different materials
• Non stop prestacking device
• Automatic raising and lowering of the feed table
• Side blowing nozzles (optional)
• Double sheet controll
• Fine adjustable air setting for thin papers
• Adjustable sheet deceleration for safe infeed into the
• Torque clutch to prevent vibration of the gripper carriages

• 3-frame stripping station for high accuracy
• Positioning system of the stripping frames facilitate and shorten the
  set-up times

Stripping station:

• 3-frame stripping station for high accuracy
• Positioning system of the stripping frames facilitate and shorten the
  set-up times

Delivery:

• Nonstop delivery with rake
• 5 adjustable delivery brushes
• Fan
• Photoelectronic missing sheet control

General:

• Automatic lubrication program for conveyor chains
• All safety devices for operators and machineel
• Touch-screen display for machine functions and fault diagnostics
• Machine completely compliant with CE-Norm
• Platform and guardrails compliant with CE-Norm
• Safety devices compliant with CE-Normal

Frontmarks:

• Fine-adjustable side pull marks
• Electronic side mark control
• Two independent front marks with photoelectronic scanning and
  digital display on the control panel
• Safety scanning of the up-down movement of the feeder pile
• Non-stop setup
• Front marks with OMRON detectors

Punching station:

• Knee lever mechanism for powerful and stable table movement
• Easy table fixing
• 4 +1 mm punching plate (Other plates optional available)
• Pneumatic frame fixing for easy operation
• Pneumatic brake and clutch
• Stable and quiet material running through the machine
• Short punching pressure setting time by servo motor
• Repeat accuracy of plate distance less than 0, 01 mm
• Display of the punching pressure on touch screen display
• 7 specially hardened alloyed gripper carriages, adjustable
• Transport chain made of special material with low weight and reduced
  ductility (UK Renold Chains)
• Cam mechanism of the gripper carriages for smooth and accurate
  and accurate running