Продам MBF 1300 PUR machine suitable for plate laminating в Shenyang
+8613998319840
Liaoning Zhanhongtu Machinery & Equipment Co., Ltd
Китай, Liaoning, Shenyang, Special vehicle base Industrial park, Liaoning Province
Детальное описание
I、Technical Parameters
Outlined Size | 4760mm*2700mm*2800mm |
Width of PVC MATERIAL | 1300mm |
Maximum Working Height | 80mm |
Glue Applied | 1. 35-45g or so for PVC material per m2. 2. 60g or so for wooden veneer per m2. |
Width of Driving Wheel |
|
Feeding Speed | 0-30m/min.,Speed adjustment by frequency conversion |
Total Power | About 50kw |
Machine Weight | About 5T |
II、Configuration and functions
This machine can paste various decorative materials such as wood flakes, varnished paper, PVC film, etc. on the surface, side and bottom of flat and strip materials to achieve a perfect decorative effect.
1、The fuselage is welded by the national standard square steel and steel plate. After the aging treatment, the gantry milling is processed as a whole with high precision; the surface of the fuselage is sandblasted and rust-removed; the frame is sprayed with paint and the protective plate is sprayed with plastic;
2、 Dedusting devices
In the blowing device, some difficult-to-handle dust on the surface of the profile is blown off. The blowing device adopts a universal connection, and the blowing angle can be adjusted according to the actual working conditions.
3、The transmission method is worm gear, the diameter of the conveying shaft is φ40mm, and the distance between the shafts is 250mm. Each transmission shaft contains 9 transmission wheels. The diameter of the transmission wheel is φ200mm. The surface is hung with silica gel. The silicone roller with diameter φ200mm is attached to the main pressure roller.
4、The control operation screen adopts a touch screen and is equipped with a simplified diagram of the equipment flow, which can clearly observe the operation of the equipment; adopts PLC control and incorporates the functions of the melter equipment into the PLC. The equipment is equipped with inching forward and backward switches, the debugging operation is simple and convenient;
5 、 The melter adopts a pressure plate heating form; the heating temperature is controllable; the heating has an alarm function;
6 、 PUR glue supply control mode: the frequency converter drives the speed regulating AC motor to drive the gear pump to supply glue; the maximum speed of the motor: 125, the maximum glue supply of the PUR glue machine: 200kg / H;
7 、 The 55-gallon PUR hot-melt glue machine adopts touch button operation, the man-machine interface is simple and friendly, and the PUR hot-melt glue machine can be operated without complicated training. The 55-gallon PUR polyurethane hot-melt glue machine uses a precision metering pump to pump glue, PUR The hot melt glue machine is equipped with a motor speed curve setting and multi-stage PUR glue machine equipment protection. When the temperature of the heating plate of the PUR polyurethane hot melt glue machine does not reach the temperature set by the system, the main motor of the PUR polyurethane hot melt glue machine does not run to prevent Forcible operation causes damage to the pump body or motor; each throat of the 55-gallon PUR hot melt glue machine is equipped with an independent pressure control system, and the PUR hot melt glue machine adopts a standard 2-way hot melt glue hose and hose output, and two channels are reserved. Glue supply hose configuration can be expanded to 7 channels of PUR hot melt glue for glue dispensing;
Создано 24.09.2021 Изменено 24.09.2021